80 mm x 140 mm x 26 mm SKF 6216-RS1 deep groove ball bearings

d2 max.:65 mm; h1:68 mm; d4 max.:30 mm; Size bolt with internal hexagon:M 8; Material constant KM:330; Basic dynamic load rating C:48 kN; Specific dynamic load factor K:100 N/mm²; l7 min.:30 mm; r1 min.:0.6 mm; Mass rod end:0.68 kg;

b:8 mm; Calculation factor Y2:3.6; Calculation factor Y0:2.5; K:4.5 mm; Limiting speed:4300 r/min; da max.:105 mm; Ca min.:7 mm; Da max.:136 mm; Da min.:131 mm; D:145 mm;

Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; D:80.0000 mm; Basic Static Radial Load Rating Co:18000 N; Sealed Speed Rating n3:5000 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; B:16.00 mm; Basic Dynamic Radial Load Rating C:24700 N; Accessories:Without Accessories; d:

H1:72 mm; D2:150 mm; r1,2 min.:2 mm; Da max.:150 mm; Basic dynamic load rating C:281 kN; d1 ≈:187 mm; Minimum load factor A:3.2; Basic static load rating C0:815 kN; D:190 mm; Mass bearing (including seat washer where applicable):9.1 kg;

Lock nut:N 068; d:340 mm; d3 max.:400.177 mm; Mass adapter sleeve assembly:35.5 kg; B5:55.016 mm; B:45.491 mm; Hydraulic nut:HMVC 68E; B1:191.338 mm; Locking plate:PL 68; d1:315.913 mm;

da min.:167 mm; B1:103 mm; D1 ≈:240 mm; Ca min.:2.4 mm; Fatigue load limit Pu:129 kN; D:270 mm; d2 ≈:191 mm; ra max.:2 mm; Mass bearing + sleeve:23 kg; Basic dynamic load rating C:1000 kN;

Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:20000 rpm; d:9.000 mm; B:8.00 mm; Oil Speed Rating Open/Shielded n2:34000 rpm; Basic Static Radial Load Rating Co:1960 N; Basic Dynamic Radial Load Rating C:4620 N; Grease Speed Rating Open/Shielded n1:28000 rpm; D:26.0000 mm; Accessories:One Shield;

Fatigue load limit Pu:0.62 kN; Static axial stiffness, preload class B:72 N/µm; Ball diameter Dw:7.938 mm; a:15.6 mm; r1,2 min.:1 mm; Mass bearing:0.15 kg; Preload class C GC:280 N; Preload class B GB:140 N; Db max.:78 mm; d1:62.7 mm;

J max.:635 mm; N1:34.925 mm; Ca:107.798 mm; H:422.275 mm; Bearing limiting speed:1900 r/min; P180°:145 kN; R1:122.237 mm; H2:85.725 mm; Eye bolt:2 x 1/2-13 UNC; L:749.3 mm;

r1,2 min.:3 mm; d:450 mm; B:368 mm; Comparative axial load rating CFa:236 kN; Thrust factor K:1.76; D1 ≈:542 mm; T:368 mm; Comparative radial load rating CF:1460 kN; Basic static load rating C0:16300 kN; Mass bearing:285 kg;

Variant:CONV-3-SF and 4-SF; Shaft Diameter D:5/8 in; Width G:7/16; Diameter E:1.469 in; Basic Radial Load Rating-Dynamic DC:1330 lbf; Depth L:7/8 in; B:0.9688 in; D:1.6540 in; Dimension F :3/16 in; Basic Radial Load Rating-Static SCO:899 lbf;

Mass inner ring:0.036 kg; F:28 mm; d:22 mm; B:20.5 mm; r, r1,2 min.:0.3 mm;

B:56.00 mm; Fillet Radius ra:2.50 mm; D:340.0000 mm; Oil Speed Rating n2:2200 rpm; Grease Speed Rating n1:1800 rpm; d:220.000 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:345000 N; Basic Static Radial Load Rating Co:480000 N;

d:260.000 mm; Basic Dynamic Radial Load Rating C:291000 N; Oil Speed Rating Open/Shielded n2:1800 rpm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:375000 N; Accessories:Snap-Ring; B:65.00 mm; Grease Speed Rating Open/Shielded n1:1500 rpm; D:400.0000 mm; Sealed Speed Rating n3:940 rp

Adapter sleeve:OH 3196 H; N1:56 mm; Locating ring:2 x FRB 10/790; P55°:11200 kN; A2:465 mm; Q120°:5800 kN; Bearing (basic designation):23196 K; L:1330 mm; Mass housing:941 kg; Ca:268 mm;